SELECT * FROM meta where pagename= 'compression_test_ring_stiffness_test_ring_flexibility_test_and_creep_ratio_test' and country= 'IN' HDPE, PVC, CPVC, UPVC & Conduit Pipe Testing Machine & Equipment Manufacturers

Computerized Twin Screw Compression Machine with Attachments for : Compression Test, Ring Stiffness Test, Ring Flexibility Test & Creep Ratio Test

TWIN SCREW COMPRESSION MACHINE

SPECIFICATION

Load Capacity 0- 2500 kg
Load Resolution 1 Kg
Tests (a) Compression Test (b) Creep Ratio Test (c) Ring Flexibility Test (d) Ring Stiffness Test
Speed (mm/min) Variable Speed through Reputed make AC Frequency Drive 1mm/min to 350mm/min.
Load Cell Electronic Beam Shape (ADI Make)
Motor Capacity 2 HP Rotomotive or Equivalent Gear Motor
Initial Compression Weight Applied Through Mechanical Handle Manually
Measure Extension Between Plates Max up to 700 mm and least count of 0.1 mm. (Based on Plate to Plate Separation) through Encoder.
Compression Plates 300 x 300 mm
  LCD based Microprocessor Load Controller for Load and Displacement Measurement.
  With Computer Interfacing Software System, Interfacing Cable RS 232 to USB & Software Master CD.
  Over Load, Excess Elongation Protection provided through Electrically and Electro Mechanically for Protection of Gear Motor & Screw Damage.
  Auto Reverse Facility after Completion of Test.
  With Auto Calibration Facility by Parameter Setting in Microcontroller.
  Flat Bellows Provided for Protection of Screw Against Dust.
Paint Powder Coating and Hard Chrome Plated
Power Requirement 440VAC, 50 Hz, 3 Phase, Neutral + Earth
Twin Screw Floor Model